Asymtek TC V3 Especificações descarregar pdf (Página 27)

Maintenance 3-13

13. Replace the top access cover.

14. Close the hood using proper procedures described in “Hood Opening/Closing Operation” of

the TC V3 Operations Manual.

To replace the bottom resistor:

1. Turn the power off by moving the Main Switch to the OFF position.

2. Open the hood to access the resistor.

3. Open the bottom access cover of the oven.

4. To remove the vitro-ceramic glass, on the inside of the oven unscrew the screw and remove

the clips from the maintenance part.

Figure 3-19 Maintenance Part Screw

Figure 3-20 Maintenance Part Clip

5. Repeat Step 4 for the other side of glass.

6. Carefully remove the glass.

7. To remove the resistor, unscrew the brides on each side and set aside.

Figure 3-21 Remove Vitro-Ceramic Glass

Figure 3-22 Bride Location

8. Remove the resistor and carefully replace with the new one.

9. Secure in place by re-installing the brides on each side.

10. Carefully re-install the vitro-ceramic glass.

Maintenance

Part

Screw

Maintenance

Part

Clip

Vitro-

Ceramic

Glass

Allen

Wrench

Screw

Brides

Resistor

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Sem comentários

Asymtek TC V3 Especificações Página 27